AUDI eReference Guide 910123 Offboard Diagnostic Information System.pdf

(33315 KB) Pobierz
eReference Guide 910123
Offboard Diagnostic Information System
Software Version 1.2.1
Audi of America, LLC
Service Training
Produced in U.S.A.
Created 03/2013
Revised 6/18/2013
Course Number 910123
Based on ODIS Service software version 1.2.1
©2013 Audi of America, LLC
All rights reserved. Information contained in this manual is
based on the latest information available at the time of printing
and is subject to the copyright and other intellectual property
rights of Audi of America, LLC., its affiliated companies and its
licensors. All rights are reserved to make changes at any time
without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by
any means, electronic, mechanical, photocopying, recording or
otherwise, nor may these materials be modified or reposted to
other sites without the prior expressed written permission of the
publisher.
All requests for permission to copy and redistribute information
should be referred to Audi of America, LLC.
Always check Technical Bulletins and the latest electronic repair
literature for information that may supersede any information
included in this booklet.
rev.6/2013
Table of Contents
Introduction ............................................................................................1
Starting ODIS ..........................................................................................2
The ODIS Start Page ...............................................................................4
Starting Guided Fault Finding (GFF) .....................................................5
Control Module Tab Tips.........................................................................9
Viewing DTCs ........................................................................................ 11
Starting Test Plans .............................................................................. 12
Erasing DTCs ........................................................................................ 14
Selecting Test Plans ............................................................................. 15
GFF Test Plan Tips ................................................................................ 18
Documents ........................................................................................... 19
Saving/Interrupting............................................................................. 22
Guided Functions ................................................................................. 25
Control Module OBD ............................................................................ 27
Vehicle OBD .......................................................................................... 29
Diagnostic Logs .................................................................................... 32
Adaptation ........................................................................................... 34
Measuring Value Blocks ....................................................................... 35
Vehicle Self Diagnosis.......................................................................... 38
Support ................................................................................................. 42
eMedia .................................................................................................. 43
Knowledge Assessment ...................................................................... 44
i
This eReference Guide contains video
links which you can use to access
interactive media.
This eReference Guide provides information regarding the new application
"Offboard Diagnostic Information System."
This eReference Guide is not a Repair Manual.
This is eReference Guide is not meant to replace the ODIS manual.
This information will only be updated electronically.
Reference
Note
!
ii
Introduction
The Offboard Diagnostic Information System (ODIS Service) is
the diagnostic software that is replacing the VAS PC software
on VAS Scan Tools. It is an extension of the VAS-PC software
that adds many features to help with vehicle diagnosis and
repair. ODIS does not replace Guided Fault Finding (GFF).
Guided Fault Finding is still an integral component of ODIS.
ODIS can be used on VAS 5051b, VAS 5052A, VAS 6150
and VAS 6160 diagnostic tools, as long as they are correctly
updated. It cannot be used on the VAS 5051A or VAS 5052.
This eReference guide contains job aids that are designed to
help you quickly move through the ODIS application.
As with any computer program, practicing is the best way to
learn.
The ODIS application has its own User Guide. The job aids in
this booklet are not intended to replace it. These job aids are
designed to help technicians get started quickly. For more
detailed information, consult the User Guide in the ODIS
application.
•
This eReference Guide only applies to the software version
shown on the cover and at the bottom of each page. The
printed version will not be revised or update. Revisions and
updates will only be done to the electronic version. Always
check the Certification Resources Center (CRC) for the
latest electronic Reference Guide version.
•
Button pushes will be indicated by the use of carets (angle
brackets). For example, if you are asked to push the Enter
button, it will be shown as: Select (or Push) <Enter>.
ODIS-1
ODIS-94
ODIS-96
ODIS-95
1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin