IC 7300 manual.pdf

(4135 KB) Pobierz
Thank you for choosing this Icom product. The IC-7300
HF/50 MHz TRANSCEIVER
is designed and built with Icom’s
state of the art technology and craftsmanship. With proper care, this product should provide you with years of
trouble-free operation. We appreciate you making the IC-7300 your transceiver of choice, and hope you agree
your IC-7300.
READ ALL INSTRUCTIONS
carefully completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL—
This
instruction manual contains full operating instructions
for the IC-7300.
Hand microphone
Spare fuse
(5 A)
Spare fuse
(25 A)
FEATURES
•
RF Direct Sampling System
The IC-7300 employs an RF direct sampling system.
RF signals are directly converted to digital data and
processed in the FPGA. This system is a leading
technology marking an epoch in amateur radio.
ACC plug
(13 pin)
•
Real-Time Spectrum Scope
The spectrum scope is class-leading in resolution,
sweep speed and dynamic range. When you touch the
scope screen on the intended signal, the touched area is
intuitive operation.
CW key plug
Spare fuse
(30 A)
Speaker plug
•
New “IP+” Function
The new IP Plus function improves 3rd order intercept
point (IP3) performance. When a weak signal is received
optimized against signal distortion.
•
Class Leading RMDR and Phase Noise
Characteristics
Phase Noise characteristics are also improved about
IC-7200.
not be supplied depending on the transceiver version.
•
A 4.3 inch touch panel color display
•
A built-in automatic antenna tuner
•
Multi-function control for easy settings
licensed according to the software license.
and is licensed according to the open source
software license.
and is licensed according to the open source
software license.
WORD
R
DANGER!
R
WARNING!
CAUTION
NOTE
DEFINITION
Personal death, serious injury or an
explosion may occur.
Personal injury,
fire
hazard or electric
shock may occur.
Equipment damage may occur.
Recommended for optimum use. No
risk of personal injury,
fire
or electric
shock.
software being used by this product.
i
•
FOR CLASS B UNINTENTIONAL RADIATORS:
This device complies with Part 15 of the FCC Rules.
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
harmful interference to radio or television reception,
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
•
and receiver.
•
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
CAUTION:
not expressly approved by Icom Inc., could void
your authority to operate this device under FCC
regulations.
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
WARNING:
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
Adobe and Adobe Reader are registered trademark of Adobe Systems Incorporated.
All other products or brands are registered trademarks or trademarks of their respective holders.
DISPOSAL
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in
the European Union, all electrical and electronic products, batteries, and accumulators
(rechargeable batteries) must be taken to designated collection locations at the end of their work-
ing life. Do not dispose of these products as unsorted municipal waste.
Dispose of them according to the laws in your area.
Icom is not responsible for the destruction or damage to the Icom transceiver, if the malfunction is because of:
•
disasters, disturbances, riots, war, or radioactive contamination.
•
ii
D
Touch operation
operation is described as shown below.
D
Touch screen precautions
•
• The touch screen may not properly work when the
topped object and so on, or touching the screen
hard may damage it.
•
pinch out cannot be performed on this touch screen.
Touch
sounds.
Touch for 1 second
If the display is touched for 1 second, one
short and one long beep sound.
D
Touch screen maintenance
• If the touch screen becomes dusty or dirty, wipe it
clean with a soft, dry cloth.
• When you wipe the touch screen, be careful not to
•
Full manual (English)
Instructions for full operations, the same as this
manual.
•
Basic manual (English)
Instructions for basic operations, the same the
manual supplied with the transceiver.
•
Basic manual
(German, Spanish, French, Italian, and other)
Instructions for basic operations in German,
Spanish, French, Italian, and other languages.
This manual may not be included, depending on the
transceiver version.
•
Schematic diagram
Includes the schematic and block diagrams.
•
HAM radio Terms
A glossary of HAM radio terms.
•
Adobe
®
Reader
®
Installer for
Adobe
®
Installer
Reader
®
.
Starting the CD
1.
2.
•
below is automatically displayed.
3. Click the desired button to open the file.
To close the Menu screen, click [Quit].
(this manual)
Full manual
Schematic
diagram
To read the manuals or Schematic diagram, Adobe
®
Reader
®
please install the Adobe
®
Reader
®
download it from Adobe Systems Incorporated’s
website.
• Microsoft
®
Windows
®
10
• Microsoft
®
Windows
®
• Microsoft
®
Windows
®
7
• Microsoft
®
Windows Vista
®
iii
Glossary
Installs the Adobe
®
Reader
®
Closes the Menu screen
depending on the transceiver version.
the following manner.
“ ” (Quotation marks):
titles displayed on the screen.
[ ] (brackets):
Used to indicate keys.
Detailed instruction
1. Push
MENU
.
Push
•
2. Touch [SET].
Routes to the set modes and setting screens
Routes to the set mode, setting screen and the setting
items are described in the following manner.
MENU
»
Display Type
Instruction example
•
MENU screen
3. Rotate
MULTI
, and then push
MULTI
to select
Rotate
Push
SET screen
Rotate
MULTI
, and then push
MULTI
to select
Rotate
Push
iv

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin