README.DOC

 *************************************************************************************
 *Genius LAN GF100TXRIII Series Fast Ethernet Card Windows for Workgroups 3.11 Driver*
 *************************************************************************************


Introduction
============
    This document describes the procedure to install Microsoft Windows
    for Workgroups 3.11 driver for Genius LAN GF100TXRIII Series Fast Ethernet
    Adapter.


Installation Procedures
=======================

    1. Turn your computer off, then Install the Genius LAN GF100TXRIII Series Fast
       Ethernet Adapter to your computer.

    2. After the adapter installation, turn your computer on.

    3. Start your Windows for Workgroups 3.11.

    4. After Windows Start OK, Select "Network" icon and then Select
       "Network  Setup" icon.

    5. Click on the "Drivers..." button.

    6. If you are replacing a previous LAN adapter select the Remove
       button to delete that adapter

    7. Click on the "Add Adapter" button.

    8. Select "Unlisted or Updated Network Adapter" item bar on the Adapter
       list.

    9. Specify the driver diskette into drive C: and enter C:\GF100\WFW311 .

   10. "Genius LAN GF100TXRIII Series Fast Ethernet Adapter" appears in the list and select
       it,then Select "OK" bar.

   11. "Genius LAN GF100TXRIII Series Fast Ethernet Adapter [NDIS3/NDIS2]" bar appears.
       It indicates the NDIS driver has been copied into your Windows system.

   12. Select "Close" bar and then Select "OK" bar.

   13. Windows prompts you to insert several WFW system diskettes.

   14. When message "Windows Setup has modified your SYSTEM.INI and
       PROTOCOL.INI...    ....." appears, select "OK" bar.

   15. Select "Restart Computer" bar.

   16. Now, the Windows for Workgroup 3.11 is ready for your Ethernet
       Adapter.