MR406ESPACE6.pdf

(222 KB) Pobierz
6
Sealing and soundproofing
65A
OPENING ELEMENT SEALING
WINDOW SEALING
SOUNDPROOFING
66A
68A
X81
JULY 2009
"The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the manufacturer in
the production of the various component units and accessories from which the vehicles are
constructed".
All rights reserved by Renault.
Copying or translating, in part or in full, of this document or use of the service part reference
numbering system is forbidden without the prior written authority of Renault.
EDITION ANGLAISE
© Renault s.a.s 2007
ESPACE IV Phase II and Phase I update - Section 6 ContentsPages
ESPACE IV Phase II and Phase I update
- Section 6
Contents
Pages
65A
OPENING ELEMENT SEALING
Door sealing film: Removal -
Refitting
Sunroof seal: Removal -
Refitting
65A-1
65A-5
66A
WINDOW SEALING
Front side door exterior
weatherstrip: Removal -
Refitting
Rear side door exterior
weatherstrip: Removal -
Refitting
66A-1
66A-3
68A
SOUNDPROOFING
Bonnet soundproofing:
Removal - Refitting
68A-1
OPENING ELEMENT SEALING
Door sealing film: Removal - Refitting
65A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Note:
The mastic must remain on the sealing film when
the sealing film is removed.
If the mastic is damaged in any way the sealing film
will need to be replaced.
1 - Front door
1st type
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
Remove:
- the door trim ( (see
Front side door trim: Remo-
val - Refitting)
),
- the door trim ( (see
Rear side door trim: Removal
- Refitting)
).
100308
2nd type
116436
a
Unclip the two guide points (1) .
a
Carefully peel off the sealing film.
65A-1
OPENING ELEMENT SEALING
Door sealing film: Removal - Refitting
2 - Rear door
1st type
65A
REFITTING
I - REFITTING PREPARATION OPERATION
a
Note:
Remove any adhesive residue from the door box
section.
Clean the inner door panel with heptane using a
dr y, lint-free cloth.
The door must be clean (free of dust, grease,
anti-adhesive products), with no trace of impuri-
ties and no condensation.
100541
2nd type
116435
a
Unclip the two guide points (2) .
a
Carefully peel off the sealing film.
65A-2
OPENING ELEMENT SEALING
Door sealing film: Removal - Refitting
II - REFITTING OPERATION FOR PART
CONCERNED
1 - Front door
1st type
2 - Rear door
1st type
65A
100541
2nd type
100308
2nd type
116435
a
Position the sealing film using the guide points (4) .
116436
a
Position the sealing film using the guide points (3) .
a
Pass through the interior door handle cable.
a
Attach the sealing film around its entire edge.
a
Pass through the interior door handle cable.
a
Attach the sealing film around its entire edge.
III - FINAL OPERATION
a
Check that the seal is watertight before refitting the
door trim.
65A-3

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin