02403.pdf

(44 KB) Pobierz
CDR-1100 (250-1092/259-1092)
Loading a CD
Faxback Doc. # 2403
If this is the first time you are using the CD-ROM drive after installing
it, you must reboot your computer. Press RESET or CRL+ALT+DEL.
If error messages appear during start up, confirm that you properly
installed the CD-ROM hardware and software by reviewing the hardware and
software installation procedures.
Faxback
Faxback
Faxback
Faxback
Document
Document
Document
Document
#
#
#
#
2405
2396
2399
2398
will
will
will
will
provide
provide
provide
provide
information
information
information
information
on
on
on
on
adapter installation.
hardware installation.
software installation.
jumper installation.
┌────────────────────────────────────────────────────────────┐
│To
load a CD (CD-ROM) and test the drive, do the following:
└────────────────────────────────────────────────────────────┘
1. Lightly push and release the front of the drive door. The disc tray
extends slightly from the bay. Pull the disc tray towards you.
2. Insert a CD-ROM disc with the label side facing up.
3. Push the disc tray all the way in.
4. Choose the CD-ROM as the default drive by typing its drives letter
followed by a colon, (d: for example,) and pressing ENTER.
NOTE: The CD-ROM drive letter is usually D, but if you have more than one
hard-drive partition, or if you have a RAM disk on your system, the
letter you use varies. Normally, the letter you use is the last drive
on your system.
5. Type dir and press ENTER.
6. If you see an MS-DOS directory on your computer's screen, you can begin
using the software and information on the disc.
NOTE:
Some CD-ROM software comes with its own install diskettes or
instructions to install from diskette, before the program will work.
Follow the instructions provided with that CD.
If you do not see a directory, see "Troubleshooting Tips."
Faxback Document # 2401 will provide information on Troubleshooting the
CDR-1100.
Note:
An audio disc has no directory.
(rjs-05/17/93)
(smm 08/25/93)
Zgłoś jeśli naruszono regulamin