04229.pdf

(44 KB) Pobierz

Tandy DMP 250 (26-2886)

Paper Parking

Faxback Doc. # 4229

Paper parking is a convenient feature which allows you to switch quickly

between fanfold paper and single sheets. To use it, your fanfold paper

must be fed with the push tractor (from the rear side of the printer).

It works by backing the fanfold paper out of the printer to a position

where it is no longer touching the platen. However, the paper remains in

the tractor, ready to feed into the printer.

┌──────────────────────────────┐

│To

"park" your fanfold paper:

│

└──────────────────────────────┘

Be sure the printer is off line.

Press PARK/LOAD. The paper retracts to the parking position.

The paper might not reach the parking position if it had previously been

advanced too far. In this case, press PARK/LOAD until the paper moves

into the parking position.

You can easily change from the push tractor mode to the single-sheet mode

without removing the tractor unit or the paper if you push the paper lever

toward the rear side of the printer.

The function of PARK/LOAD varies depending on the current paper position.

∞

If the paper is in the tear-off position, pressing PARK/LOAD moves it

to the park position.

If the paper is in the park position, pressing PARK/LOAD moves it to

the TOF position (loads the paper).

If the paper is in the TOF position, pressing PARK/LOAD moves it to

the tear-off position.