VT52 terminal emulator overlay for CBterm/C64 (c) 1986 by Chrisdos. All rights reserved. Ver 1.0 The CBTT52 program is an overlay routine for CBterm that will allow CBterm to emulate some functions of a VT52 terminal. To use, simply LOAD"CBTT52",8,1 Then: NEW Then LOAD"CBTERM" and RUN. CBterm will find CBTT52 in memory and install it. The version number will read V4T5. The following VT52 control codes are supported: <ESC> A Cursor Up <ESC> B Cursor Down <ESC> C Cursor Right <ESC> D Cursor Left <ESC> H Cursor Home <ESC> J Clear to End of Screen <ESC> K Clear to End of Line <ESC> Ylc Set Cursor to line, column <ESC> n Normal Video Characters <ESC> o Reverse Video Characters <ESC> I (Reverse Line Feed) and <ESC> Z (Ident) are not supported in this version. 2 other local control keys have been redefined in addition to CBterms normal C= controls. These are C= (English Pound) - Toggle EVEN/ODD Parity, and C= 6 - Send BREAK SIGNAL. The VT52 emulator starts up in EVEN Parity. Pressing C= (English Pound) will switch to ODD Parity. Pressing again will toggle back to EVEN, etc. This refers to the TRANSMITTED bytes only. CBterm ignors recieved parity. Pressing the C= 6 control keys will cause a BREAK signal of 250ms to be sent. For more information or help with this or any CBterm program, leave a message to SYSOP in the Compuserve CBIG sig. (Go CBIG) . -Chrisdos
Amiga7878