CY2077.PDF

(182 KB) Pobierz
CY2077
High Accuracy EPROM Programmable
Single-PLL Clock Generator
Features
• High accuracy PLL with 12-bit multiplier and 10-bit
divider
• EPROM-programmability
• 3.3V or 5V operation
• Operating frequency
— 390 kHz–133 MHz at 5V
— 390 kHz–100 MHz at 3.3
• Reference input from either a 10–30 MHz crystal or a
1–75 MHz external clock
• EPROM-selectable TTL or CMOS duty cycle levels
Benefits
Enables synthesis of highly accurate and stable output clock
frequencies with zero or low PPM
Enables quick turnaround of custom frequencies
Supports Industry Standard design platforms
Services most PC, networking, and consumer applications
Lowers cost of oscillator as PLL can be programmed to a high
frequency using either a low-frequency, low-cost crystal, or an
existing system clock
Duty cycle centered at 1.5V or V
DD
/2
Provides flexibility to service most TTL or CMOS applications
• Sixteen selectable post-divide options, using either PLL
Provides flexibility in output configurations and testing
or reference oscillator/external clock
• Programmable PWR_DWN or OE pin, with asynchro-
nous or synchronous modes
• Low Jitter outputs typically
— < ±100 ps (pk-pk) at 5V and f>33 MHz
— < ±125 ps (pk-pk) at 3.3V and f>33 MHz
• Controlled rise and fall times and output slew rate
Enables low-power operation or output enable function and flex-
ibility for system applications, through selectable instantaneous
or synchronous change in outputs
Suitable for most PC, consumer, and networking applications
Has lower EMI than oscillators
CY2077 Logic Block Diagram
PWR_DWN
or OE
Phase Detector
XTALOUT*
CRYSTAL
OSCILLATOR
Charge
Pump
CONFIGURATION
EPROM
8-Pin
Top View
VDD
XTALOUT
XTALIN
PD/OE
1
2
3
4
8
7
6
5
CLKOUT
VSS
VSS
VSS
Q
10 bits
XTALIN
or
external clock
VCO
P
12 bits
HIGH
ACCURACY
PLL
MUX
* When using an external clock source leave
XTALOUT floating
/ 1, 2, 4, 8, 16, 32, 64, 128
CLKOUT
Cypress Semiconductor Corporation
•
3901 North First Street
•
San Jose
•
CA 95134
•
408-943-2600
July 28, 2000
CY2077
Functional Description
The CY2077 is an EPROM-programmable, high-accuracy,
general-purpose, PLL-based design for use in applications
such as modems, disk drives, CD-ROM drives, video CD play-
ers, DVD players, games, set-top boxes, and data/telecommu-
nications.
The CY2077 can generate a clock output up to 133 MHz at 5V
or 100 MHz at 3.3V. It has been designed to give the customer
a very accurate and stable clock frequency with little to zero
PPM error. The CY2077 contains a 12-bit feedback counter
divider and 10-bit reference counter divider to obtain a very
high resolution to meet the needs of stringent design specifi-
cations. Further more, there are 8 output divide options of /1,
/2, /4, /8, /16, /32, /64, and /128. The output divider can select
between the PLL and crystal oscillator output/external clock,
providing a total of 16 different options. To add more flexibility
in designs. TTL or CMOS duty cycles can be selected.
Power management with the CY2077 is also very flexible. The
user may choose either a PWR_DWN or an OE feature which
both have integrated pull-up resistors. PWR_DWN and OE sig-
nals can be programmed to have asynchronous and synchro-
nous timing with respect to the output signal. There is a weak
pull-down on the output that will pull CLKOUT LOW when ei-
ther the PWR_DWN or OE signal is active. This weak
pull-down can easily be overridden by another clock signal in
designs where multiple clock signals share a signal path.
Multiple options for output selection, better power distribution
layout, and controlled rise and fall times enable the CY2077 to
be used in applications that require low jitter and accurate ref-
erence frequencies.
EPROM Configuration Block
The following table summarizes the features which are config-
urable by EPROM.
EPROM Adjustable Features
Feedback counter value (P)
Reference counter value (Q)
Output divider selection
Duty cycle levels (TTL or CMOS)
Power management mode (OE or PWR_DWN)
Power management timing
(synchronous or asynchronous)
PLL Output Frequency
The CY2077 contains a high resolution PLL with 12-bit multi-
plier and 10-bit divider.The output frequency of the PLL is de-
termined by the following formula:
2
• (
P + 5
)
F
PLL
= ---------------------------
•
F
REF
(
Q + 2
)
where P is the feedback counter value and Q is the reference
counter value. P and Q are EPROM programmable values.
Power Management Features
PWR_DWN and OE options are configurable by EPROM pro-
gramming for the CY2077. In PWR_DWN mode, all active cir-
cuits are powered down when the control pin is set to LOW.
When the control pin is set back to HIGH, both the PLL and
oscillator circuit must re-lock. In the case of OE, the output is
three-stated and weakly pulled down when the control pin is
set to LOW. The oscillator and PLL are still active in this state,
which leads to a quick clock output return when the control pin
is set back to HIGH.
Additionally, PWR_DWN and OE can be configured to occur
asynchronously or synchronously with respect to CLKOUT. In
asynchronous mode, PWR_DWN or OE disables CLKOUT im-
mediately (allowing for logic delays) without respect to the cur-
rent state of CLKOUT. Synchronous mode will prevent output
glitches by waiting for the next falling edge of CLKOUT after
PWR_DWN or OE becomes asserted.
Pin Summary
Name
V
DD
V
SS
X
D
X
G
CLKOUT
Pin
1
5, 6, 7
2
3
8
Description
Voltage supply.
Ground. (all the pins have to be grounded)
Crystal connection.
Crystal connection.
EPROM programmable power down or output enable pad. Serves as V
PP
in programming mode.
Clock output. Also serves as three-state input and output during programming.
PWR_DWN / OE 4
2
CY2077
Device Functionality: Output Frequencies
Parameter
Fo
Description
Output frequency
Condition
V
DD
= 4.5–5.5V
V
DD
= 3.0–3.6V
Min.
0.39
0.39
Max.
133
100
Unit
MHz
MHz
Absolute Maximum Ratings
(Above which the useful life may be impaired. For user guide-
lines, not tested.)
Supply Voltage ..................................................–0.5 to +7.0V
Input Voltage ............................................–0.5V to V
DD
+0.5V
Storage Temperature (Non-Condensing) ... –55°C to +150°C
Junction Temperature ................................ –40°C to +100°C
Static Discharge Voltage .......................................... >2000V
(per MIL-STD-883, Method 3015)
Operating Conditions
Parameter
V
DD
T
A
C
TTL
Supply Voltage
Operating Temperature, Ambient
Max. Capacitive Load on outputs for TTL levels
V
DD
= 4.5–5.5V, Output frequency = 1–40 MHz
V
DD
= 4.5–5.5V, Output frequency = 40–133 MHz
Max. Capacitive Load on outputs for CMOS levels
V
DD
= 4.5–5.5V, Output frequency = 1–66.6 MHz
V
DD
= 4.5–5.5V, Output frequency = 66.6–133 MHz
V
DD
= 3.0–3.6V, Output frequency = 1–40 MHz
V
DD
= 3.0–3.6V, Output frequency = 40–100 MHz
Reference Frequency, input crystal with C
load
= 10 pF
Reference Frequency, external clock source
10
1
Description
Min.
3.0
0
Max.
5.5
+70
50
25
50
25
30
15
30
75
Unit
V
°C
pF
pF
pF
pF
pF
pF
MHz
MHz
C
CMOS
X
REF
Electrical Characteristics
T
A
= 0°C to +70°C
Parameter
V
IL
V
IH
V
OL
V
OHCMOS
V
OHTTL
I
IL
I
IH
I
DD
I
DDS
R
UP
Description
Low-level Input Voltage
High-level Input Voltage
Low-level Output Voltage
High-level Output Voltage,
CMOS levels
High-level Output Voltage,
TTL levels
Input Low Current
Input High Current
Power Supply Current,
Unloaded
Stand-by current
Input Pull-Up Resistor
V
DD
= 4.5–5.5V
V
DD
= 3.0–3.6V
V
DD
= 4.5–5.5V
V
DD
= 3.0–3.6V
V
DD
= 4.5–5.5V, I
OL
= 16 mA
V
DD
= 3.0–3.6V, I
OL
= 8 mA
V
DD
= 4.5–5.5V, I
OH
= –16 mA
V
DD
= 3.0–3.6V, I
OH
= –8 mA
V
DD
= 4.5–5.5V, I
OH
= –8 mA
V
IN
= 0V
V
IN
= V
DD
V
DD
= 4.5–5.5V, Output frequency <= 133 MHz
V
DD
= 3.0–3.6V, Output frequency <= 100 MHz
V
DD
= 4.5-5.5V
V
DD
= 3.0-3.6V
V
DD
= 4.5–5.5V, V
IN
= 0V
V
DD
= 4.5–5.5V, V
IN
= 0.7V
DD
1.1
50
25
10
3.0
100
20
V
DD
–0.4
V
DD
–0.4
2.4
10
5
45
25
100
50
8.0
200
2.0
0.7V
DD
0.4
0.4
Test Conditions
Min.
Typ.
Max.
0.8
0.2V
DD
Unit
V
V
V
V
V
V
V
V
V
µA
µA
mA
mA
µA
MΩ
kΩ
µA
I
OE_CLKOUT
CLKOUT Pull-Down Current V
DD
= 5.0
3
CY2077
Output Clock Switching Characteristics
Over the Operating Range
[1]
Parameter
t
1w
Description
Output Duty Cycle at
1.4V, V
DD
= 4.5–5.5V
t
1w
= t
1A
÷
t
1B
Output Duty Cycle at
V
DD
/2, V
DD
= 4.5–5.5V
t
1x
= t
1A
÷
t
1B
Output Duty Cycle at
V
DD
/2, V
DD
= 3.0–3.6V
t
1y
= t
1A
÷
t
1B
Test Conditions
1–50 MHz, C
L
<= 50 pF
50–66 MHz, C
L
<= 15 pF
66–125 MHz, C
L
<= 25 pF
125–133 MHz, C
L
<= 15 pF
1–66.6 MHz, C
L
<= 25 pF
66.6–125 MHz, C
L
<= 25 pF
125–133 MHz, C
L
<= 15 pF
1–40 MHz, C
L
<= 30 pF
40–100 MHz, C
L
<= 15 pF
Min.
45
45
40
40
45
40
40
45
40
Typ.
Max.
55
55
60
60
55
60
60
55
60
1.8
1.2
0.9
3.4
4.0
2.4
1.8
1.2
0.9
3.4
4.0
2.4
1
T/2
10
1
T/2
10
2
T+10
15
2
T+10
15
100
±100
±125
±250
±125
±200
1% of F
O
Unit
%
%
%
%
%
%
%
%
%
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ms
ns
ns
ms
ns
ns
ns
ps
ps
ps
t
1x
t
1y
t
2
Output Clock Rise Time Between 0.8 –2.0V, V
DD
= 4.5V–5.5V, C
L
= 50 pF
Between 0.8 –2.0V, V
DD
= 4.5V–5.5V, C
L
= 25 pF
Between 0.8 –2.0V, V
DD
= 4.5V–5.5V, C
L
= 15 pF
Between 0.2V
DD
– 0.8V
DD
, V
DD
= 4.5V–5.5V, C
L
= 50 pF
Between 0.2V
DD
– 0.8V
DD
, V
DD
= 3.0V–3.6V, C
L
= 30 pF
Between 0.2V
DD
– 0.8V
DD
, V
DD
= 3.0V–3.6V, C
L
= 15 pF
Output Clock Fall Time
Between 0.8V–2.0V, V
DD
= 4.5V–5.5V, C
L
= 50 pF
Between 0.8 –2.0V, V
DD
= 4.5V–5.5V, C
L
= 25 pF
Between 0.8 –2.0V, V
DD
= 4.5V–5.5V, C
L
= 15 pF
Between 0.2V
DD
– 0.8V
DD
, V
DD
= 4.5V-5.5V, C
L
= 50 pF
Between 0.2V
DD
– 0.8V
DD
, V
DD
= 3.0V–3.6V, C
L
= 30 pF
Between 0.2V
DD
– 0.8V
DD
, V
DD
= 3.0V–3.6V, C
L
= 15 pF
PWR_DWN or OE pin LOW to HIGH
[2]
t
3
t
4
t
5a
t
5b
t
6
t
7a
t
7b
t
8
t
9
Start-Up Time Out of
Power-Down
Power Down Delay Time PWR_DWN pin HIGH to output LOW
(synchronous setting)
(T=frequency oscillator period)
Power Down Delay Time PWR_DWN pin HIGH to output LOW
(asynchronous setting)
Power Up Time
Output Disable Time
(synchronous setting)
Output Disable Time
(asynchronous setting)
Output Enable Time
Peak-to-Peak Period
Jitter
From power on
[2]
OE pin HIGH to output Hi-Z
(T=frequency oscillator period)
OE pin HIGH to output Hi-Z
PWR_DWN or OE pin LOW to HIGH
V
DD
= 4.5V–5.5V, Fo > 33 MHz, VCO > 100 MHz
V
DD
= 3.0V–3.6V, Fo > 33 MHz, VCO > 100 MHz
V
DD
= 3.0V–5.5V, Fo <33 MHz
Notes:
1. Not all parameters measured in production testing.
2. Oscillator start time cannot be guaranteed for all crystal types. This specification is for operation with AT cut crystals with ESR < 70 ohms.
Switching Waveforms
Duty Cycle Timing
(t
1w,
t
1x,
t
1y
)
t
1A
t
1B
OUTPUT
4
CY2077
Switching Waveforms
(continued)
Output Rise/Fall Time
V
DD
OUTPUT
0V
t
2
t
3
Power Down Timing
(synchronous and asynchronous modes)
POWER
DOWN
V
DD
0V
V
IL
V
IH
t
4
CLKOUT
(synchronous
[3
]
)
T
CLKOUT
(asynchronous
[4
]
)
t
5b
1/f
t
5a
1/f
Power Up Timing
V
DD
POWER
UP
CLKOUT
1/f
0V
V
DD
– 10%
t
6
min. 2 ns
Output Enable Timing
(synchronous and asynchronous modes)
V
DD
OUTPUT
ENABLE
0V
T
CLKOUT
(synchronous
[3
]
)
t
7a
CLKOUT
(asynchronous
[4
]
)
t
7b
High Impedance
t
8
High Impedance
t
8
V
IL
V
IH
Notes:
3. In synchronous mode the power-down or output three-state is not initiated until the next falling edge of the output clock.
4. In asynchronous mode the power-down or output three-state occurs within 25 ns irrespective of position in the ouput clock cycle.
5
Zgłoś jeśli naruszono regulamin