2298_Quickreferenceguide.pdf

(927 KB) Pobierz
quick reference guide
EdgE
®
605/705
gPS-ENABLEd BIKE COMPUTER
MB
Warning:
This product contains a lithium-ion battery. See the
Important
Safety and Product Information
guide in the product box for important
battery safety information.
Warning:
Always consult your physician before you begin or modify any
exercise program. See the
Important Safety and Product Information
guide
in the product box for product warnings and other important information.
Buttons
➊
power
➐ ➋
mode
➏
➎
➍
• Press and hold to turn the Edge
on/off.
• Press to turn the backlight on/off.
• Press to return to the previous
page.
• Press and hold to switch bike
profiles.
➊
➋
➌
➌
reset/lap
• Press and hold to reset the timer.
• Press to create a new lap.
➍
thumb stick/enter
• Move the thumb stick to scroll
through menus, options, and data
fields.
• Press in the thumb stick to select
options and to acknowledge
messages.
Resetting the Edge
If your Edge is locked up/frozen,
press
mode
and
reset/lap
simultaneously to reset the Edge.
This does not erase any of your data
or settings.
➎
start/stop
➏
menu
Icons
Battery charge level
Battery charging
Satellite icon changes from
blank to 3D when receiving
satellite signals.
Heart rate sensor active
Cadence sensor active
Power sensor active
Keylock active
Press to start/stop the timer.
• Press to open the menu page.
• Press and hold to lock/unlock the
Edge buttons.
➐
in/out
Press to zoom in/out on the map
page and the altimeter page.
Step 1: Charge the
Battery
You can charge the Edge using the
AC charger or the USB cable and
your computer.
note:
To prevent
corrosion, thoroughly
dry the mini-USB
port, weather cap, and
surrounding area before
charging or connecting to
a personal computer.
To charge the Edge:
1. On the back of the Edge,
pull up the weather cap
from the mini-USB port.
2. Plug the mini-USB end of the AC
or USB cable into the mini-USB
port on the back of the Edge.
Mini-USB port
under weather
cap
3. Plug the other end into a
standard wall outlet (AC) or
an available USB port on
your computer (USB).
Step 2: Install the
Edge
For best GPS reception, position the
bike mount so the front of the Edge
is oriented toward the sky. You can
install the bike mount on the stem or
the handlebars. The stem installation
(shown here) provides a more sturdy
location. The optional wedge should
be used under the mount for a better
viewing angle.
To install the Edge on your
bike:
2. Attach the bike mount securely
using two cable ties.
3. Align the Edge with the bike
mount so that the slots on the
back of the unit are parallel
with the rails on the mount.
1. Place the wedge on the bike
stem or the handlebars, and
then place the bike mount on
the wedge. Make sure the
release lever is on the left.
Release
lever
Wedge
Rail
Bike mount
Slot
Cable ties
For bars with a diameter less than
1 in (25.4 mm):
Place the additional
rubber pad under the bike mount to
increase the diameter of the bar. The
rubber pad also prevents the mount
from slipping. Continue with step 2.
Release
lever
4. Slide the Edge to the left
until it snaps into place.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin