Disassembly & Reassembly.pdf

(1144 KB) Pobierz
7. Level 2 Repair
7-1. Disassembly and assembly Instructions
7-1-1. Disassembly
1
Unscrew 6 points at the REAR case
2
DIsassemble the REAR as below
sequence
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
3
Disassemble the PBA. Be careful with hooks.
4
Separate the PBA from the FRONT
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
5
Disassemble the LCD Module.
6
Disassemble
the Keypad Deco
1) Be careful not to make scratch and molding damage!
3) Be careful not to damage LCD FPCB and LCD
7
Disassemble the Keypad. Be careful with
hooks.
1) Be careful not to make scratch and molding damage!
8
Disassemble the MIC
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
2) Be careful not to damage MIC FPCB
7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
9
Disassemble the Receiver
10
Unscrew 2 points at the Shield Can.
Disassemble the SHIELD CAN
1) Be careful not to make scratch and molding damage!
3) Be careful not to damage Receiver FPCB
1) Be careful not to make scratch and molding damage!
11
Disassemble the 5M Camera, Flash(GT-
S5611)
1) Be careful not to make scratch and molding damage!
7-3
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
7-1-2. assemble
1
Soldering 3 points of MIC FPCB pad with
PBA
2
Soldering 2 points of RECEIVER FPCB pad
with PBA
1) Be careful not to make scratch and molding
damage!
3
Screw 2 points at the SHIELD CAN.
Assemble the SHIELD CAN
1) Be careful not to make scratch and molding damage!
4
Assemble the 5M Camera(GT-S5611)
1) Be careful not to make scratch and molding damage!
2)- Torque : 1.0 ~ 1.2 kgf.cm
- Size : M1.4 * L2.5
7-4
1) Be careful not to make scratch and molding damage!
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair
5
Assemble the Flash.
6
INSERT KEYPAD to FRONT.
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
7
INSERT SPEAKER, MOTOR to REAR.
8
INSERT POGO PIN, Assemble the Antenna.
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
7-5
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin