W516-E1-01+CP1L-ELEM_CPU_Unit_OPERATION MANUAL.pdf
(
24861 KB
)
Pobierz
Cat. No. W516-E1-01
SYSMAC CP Series
CP1L-EL20D@-@
CP1L-EM30D@-@
CP1L-EM40D@-@
CP1L-EL/EM CPU Unit
OPERATION MANUAL
CP1L-EL20D@-@
CP1L-EM30D@-@
CP1L-EM40D@-@
CP1L-EL/EM CPU Unit
Operation Manual
Produced March 2012
iv
Notice:
OMRON products are manufactured for use according to proper procedures
by a qualified operator and only for the purposes described in this manual.
The following conventions are used to indicate and classify precautions in this
manual. Always heed the information provided with them. Failure to heed pre-
cautions can result in injury to people or damage to property.
!DANGER
!WARNING
!Caution
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury. Additionally, there may be severe property damage.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury. Additionally, there may be severe property damage.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury, or property damage.
OMRON Product References
All OMRON products are capitalized in this manual. The word “Unit” is also
capitalized when it refers to an OMRON product, regardless of whether or not
it appears in the proper name of the product.
The abbreviation “Ch,” which appears in some displays and on some OMRON
products, often means “word” and is abbreviated “Wd” in documentation in
this sense.
The abbreviation “PLC” means Programmable Controller. “PC” is used, how-
ever, in some CX-Programmer displays to mean Programmable Controller.
Visual Aids
The following headings appear in the left column of the manual to help you
locate different types of information.
Note
Indicates information of particular interest for efficient and convenient opera-
tion of the product.
1,2,3...
1. Indicates lists of one sort or another, such as procedures, checklists, etc.
©
OMRON, 2012
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or
by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of
OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-
stantly striving to improve its high-quality products, the information contained in this manual is subject to change without
notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility
for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.
v
Unit Versions of CP-series CPU Units
Unit Versions
Notation of Unit Versions
on Products
A “unit version” has been introduced to manage CPU Units in the CP Series
according to differences in functionality accompanying Unit upgrades.
The unit version is given to the right of the lot number on the nameplate of the
products for which unit versions are being managed, as shown below.
Product nameplate
CP1L-EM40DR-D
CPU UNIT
SYSMAC
CP1L
CP-series CPU Unit
COM
NC
01
00
03
02
05
04
07
09
06
POWER
RUN
ERR/ALM
INH
LNK/ACT
BKUP
08
11
10
01
00
03
02
05
04
07
06
09
08
11
10
EXP
Lot No. 01312M
OMRON Corporation
Ver.1.0
MADE IN CHINA
MAC Address:
01234567890A
1
ANALOG INPUT
V1+ V2+ COM
00
01
02
COM(V+)
03
COM
04
05
2
06
07
00
COM
01
02
03
COM
04
05
06
07
Unit version (Example for Unit version 1.0)
Lot No.
Confirming Unit Versions
with Support Software
CX-Programmer version 9.4 or higher can be used to confirm the unit version
of the CP1L-EL/EM CPU Unit.
Note
CX-Programmer version 9.3 or lower cannot be used to confirm unit versions
for CP1L-EL/EM CPU Units.
■
Confirmation Procedure
Procedure When the Device Type and CPU Type Are Known
1,2,3...
1. Set the
Device Type
Field in the Change PLC Dialog Box to
CP1L-E.
vi
Plik z chomika:
markusduzy
Inne pliki z tego folderu:
CPL1 W461_PL2_02B.pdf
(27591 KB)
W516-E1-01+CP1L-ELEM_CPU_Unit_OPERATION MANUAL.pdf
(24861 KB)
W462-E1-06+CP1L+OperManual.pdf
(16494 KB)
W450-E1-02 Operation Manaul CP1H.pdf
(15792 KB)
W480-E1-03+CP1E-Unit_Software+UsersManual.pdf
(14654 KB)
Inne foldery tego chomika:
PREZENTACJE
PROGRAMY
Zgłoś jeśli
naruszono regulamin