!!!BE SURE THAT YOU DO SOMETHING AT YOUR OWN RISK!!!
!!!FOLLOW MY INSTRUCTION FOR STEP BY STEP!!!
I want to say that Im not a real programmer, I found some way to flash CID LOCKED device and wrote only shell and collected some useful tools.
WARNING!!! IF YOU WILL SEE CMD WINDOW DON’T CLOSE IT!!!
WARNING!!! DON’T TOUCH YOUR PC OR DEVICE WHILE FLASHING!!!
! If you encounter error please DONt hard reset and try the following steps:
1. Disconnect USB cable and reconnect again
2. Wait until activesync is fully connected
3. Setup EnableRapi.cab again and reboot
4. Run ShellTool again and folow the steps
Let’s begin
1) You should disable your antivirus and firewall, close all active application at first
2) Download ROM what you want to flash at your device
3) Place nk.nbf to the ShellTool directory
4) Connect your device with usb ActiveSync, then copy Cert_SPCS.cab and EnableRapi.cab. Then setup them to the main memory. Wait some time and reboot your device. After reboot you should turn off your radio module on your device!!!
5) Run ShellTool
6) Click Get ROM info. After that you will see some information about ROM and what this ROM includes
7) Now we can extract OS. Click “Extract OS” and wait for some time. You will get “Done!” message when os will be extracted
8) Click on “Flash OS”. You will see next window. Read all information and follow instructions.
Your device should be connected via usb ActiveSync connection.
If it is so, lets continue
9) After that click “OK”. ShellTool started to flash your device. You won’t see any percents of progress and your device won’t be in bootloadermode. My program will be like “no answer program”. But in this moment it flashing your device!
PlEASE!!! DON’T TOUCH YOUR PC OR DEVICE. YOU SHOULD WAIT ABOUT 15 MIN WHILE PROCESS WILL BE FINISHED!!!
10) When your device will be flashed you will get message about it! “[your time] Write ROM 80040000-OS.nb End”
11) ONLY AFTER “END” MESSAGE YOU SHOULD DISCONNECT YOUR DEVICE AND MAKE HARD RESET!!! IT IS VERY IMPORTANT!!!
* 1 - Holding "Voice Dial" + "Wireless Manager" while short pressing the "reset" button
* 2 - Hold the 2 buttons until you see the screen telling you to press send button to hard reset.
* 3 - Press "send/dial" button to hard reset
********************
! If you encounter itsutils error please DONt hard reset and try the following steps:
---1. Disconnect USB cable and reconnect again
---2. Wait until activesync is fully connected
---3. Setup EnableRapi.cab again and reboot
---5. Run ShellTool again and folow the steps
ps. You could donate me if you want ;)
e-mail: 624246@bk.ru
arcaingp