PillowcasePattern.pdf

(52 KB) Pobierz
Pillowcase
Pattern
A 15 minute project!
Jim’s
Quilt Patterns
™
806 Reserve Court | Glenville, NY 12302 | (845) 750-5723
©2011 Jim Helms
27” (3/4 yard) for the body of the pillow case
12” (1/3 yard) for the outer band
3�½” for the inner band
Place all three fabrics on top of
one another, aligning the top folds.
Trim away the selvedges on all of the
fabrics at the bottom.
Top (fold)
Sew
Fabric needed
Turn the 27” pillowcase body
fabric right sides together and sew from
the fold out, then down the long edge.
Zigzag over the sewn edges to secure.
edge
selvedge
selvedge
selvedge
selvedge
selvedge
selvedge
selv
Create 6” and 1¾” strips from the
12” and the 3�½ strips by ironing them
in half.
Turn the pillowcase body right
side out. Insert the folded 6” fabric loop
into the pillowcase; add the folded 3¼”
fabric loop outside the pillowcase, raw
edges facing out.
Align raw edges
Fold
Unfold the ends of the 12” and the
3�½” strips and sew them into loops.
Sew through all three aligned raw
edges
Sew together
Front sides together
Sew
Pull out the folded 6” fabric loop
from the pillowcase.
Pull out
The finished pillow case!
Iron the folded 3¼” fabric loop
over the raw edges to hide the seams
Iron over
Top stitch the edges to secure.
Top stitch
Pillowcase Pattern
A 15 minute project!
27” (3/4 yard) for the body of the pillow case
12” (1/3 yard) for the outer band
3�½” for the inner band
Fabric needed
© 2011 Jim Helms
All rights reserved.
This pattern is for your personal use only. Items made from this pattern are protected by
Federal Copyright Laws and are for personal use only and may not be photocopied or
reproduced for commercial use or resale in any form without written consent from Jim
Helms.
Jim’s
Quilt Patterns
™
806 Reserve Court | Glenville, NY 12302
(845) 750-5723
{ÍJQP1001;~
JQP1001

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin