Gracenote update.pdf

(523 KB) Pobierz

B65 21 09 Attachment A

PROCEDURE TO UPDATE THE GRACENOTE DATABASE

May 2012

The following procedure describes how to update the music track database on the hard disk drive of

the CIC, using the Gracenote® database Update CD.

Note: The update procedure should only be performed with the ignition on (connect the battery

charger if necessary), and do not drive the vehicle or turn off the ignition while the update is in

progress. The update takes less than 10 minutes.

1. Insert the Gracenote® database Update CD into

the CIC drive.

2. Deactivate the “Split screen” feature if it is active.

3. Enter the Service Menu of the CIC as follows:

•

Call up the Start Menu

Push the controller in the up direction and

hold for at least 10 seconds

Turn the controller 3 notches to the right

Turn the controller 3 notches to the left

Turn the controller 1 notch to the right

Turn the controller 1 notch to the left

Turn the controller 1 notch to the right

Press the controller down and release

The Service menu is now added as the last

submenu to the menu Settings.

4. Once the Gracenote® database Update CD has

been loaded, compare both database versions.

Hard Disk Drive (HDD) to Update CD

5. Start the installation of the Gracenote® database

update only if the GNDB HDD version is not up-

to-date.

6. The Gracenote® database update progress is

shown in percentages.

7. After the Gracenote® database update is

completed:

•

Remove the Gracenote® database Update

CD from the drive.