****************************************************************************** * Genius LAN GE2500III Ethernet Card WINNT 3.5 Driver * ****************************************************************************** Introduction ============ This document describes the procedure to install Windows NT 3.5 driver for GE2500III PCI Ethernet Adapter. Installation Procedures ======================= 1. If Windows NT operating system is being installed, select other manufacturers from the network adapter card options and follow steps 3-9. 2. If Windows NT operating system is already installed, logon as Administrator and select Netwrok icon from the control panel. 3. In the Network Setting dialog box, choose "Add Adapter"button. The Add Network Adapter dialog box appears. 4. In the Add Network Adapter dialog box, pull the adapter card list menu and select "<Other>Requires disk from manufacturer" from the list, and then press <Enter> button. . 5. Insert the driver diskette in Drive A/B. 6. In the netx windows, specify the correct drive and path (A:\WINNT35 or B:\WINNT35) when asked to give the source for the driver, and then choose the OK button. 7. Then, select the "GE2500III PCI Ethernet Adapter" from the dialog box to install GE2500III PCI Adapter. 8. The screen will appear "Input EthernetID" dialog box which is provide by RTL8029.SYS driver. This option is only required when you have more than one GE2500III PCI Ethernet Adapters on this computer. Select SKIP if only one adapter is installed on this computer. 9. Finally close the Setup dialog box and exit from the Add Network adapter dialog box to complete the installation. Follow any instructions appearing on the screen. 10. Shutdown and reboot the system.
ekobudowa