Colorado_ENQuickStartGuide.pdf

(4459 KB) Pobierz
Waypoints
To use the Shortcuts menu:
1. Select Shortcuts. The Shortcuts
menu appears.
2. Rotate the Rock
‘n Roller™ to the
preferred application and press
ENTER.
System Status
1. Press and quickly release the Power key. The System
Status page on the Colorado appears.
2. Rotate the Rock
‘n Roller clockwise or counter-clockwise
to increase or decrease the backlight.
3. Select Back to close the System Status page and return to
the previous page.
Time, day, and date
Mark Waypoint
on Shortcuts
Map Page
To access the Map page:
1. Select Shortcuts > Map.
2. Select Options to show the Data fields, change the Data
fields, or hide the soft key labels.
Quick Start Guide
To adjust the backlight level:
Colorado Series
™
To zoom in and out on the Map page:
To mark a waypoint:
1. Rotate the Rock
‘n Roller clockwise to zoom in.
2. Rotate the Rock
‘n Roller
counter-clockwise to zoom out.
Zoom scale
1. From the Map page, select
Shortcuts. Rotate the Rock ‘n
Roller and select Mark Waypoint.
The screen shows that the waypoint
was successfully saved. A three-digit
number is assigned to the new
waypoint (your current location).
2. Select Done to save the waypoint.
Select Edit to edit the waypoint
properties. Select Cancel to delete
the waypoint.
Battery level
GPS signal
strength
Backlight
adjustment
System Status Page
Zoom Out View
Zoom In View
1. Select Shortcuts > Where
To? >
Waypoints.
Waypoint Saved
2. Highlight the preferred waypoint
and press ENTER. A green circle
containing the word Go appears.
3. Press ENTER to begin navigating to
the waypoint, or press Options to
project or edit the waypoint.
4. To stop navigation, select Shortcuts
> Stop
Navigation.
Waypoint Page
To go to a waypoint:
Note:
The System Status page is also a quick way to check
the time, day, date, battery level, and GPS signal strength.
To pan across the map:
1 Press up, down, left, and right on the Rock
‘n Roller to
move the cursor on the map.
2. Select Done to stop panning.
Please visit www.garmin.com for additional
documentation and information.
190-00751-01 Rev. A © 2007 Garmin Ltd. or its subsidiaries
Printed in Taiwan
all-terrain GPS navigator
190-00751-01_0A.indd 1
10/19/2007 10:36:08 AM
Overview
WARNING:
See the
Important Safety and Product Information
sheet in the product box for product warnings and other important
information.
Rock ‘n Roller
Left soft key
Power key
(backlight)
Right soft key
Color
screen
Weather cap
Startup
Using the Rock ‘n Roller™
• Rotate the Rock
‘n Roller
ENTER key
to move up and down
menu lists. You can
also move through
the lists by pressing
up, down, left, and
right.
• Press ENTER to
make all selections
Rock ‘n Roller
on the Colorado.
• Press up, down, left, and right on the Rock
‘n Roller to
pan the map.
• The Left soft key and the Right soft key are used to
access specific options that appear on the soft key
labels.
• When labeled, press the soft keys to show available
menus.
• If a soft key is not labeled, it is not available for that
specific page.
To install batteries:
Additional Functions
Battery cover
Latch
1. Remove the battery cover
by lifting the latch and
sliding the cover off the
Colorado.
2. Insert the batteries,
observing the diagram
molded into the battery
compartment.
3. Replace the battery cover
by sliding it back onto the
Colorado and fastening the
latch.
First-time startup:
Basic Operation
1. Press and hold the Power key until the Garmin logo
appears on the screen.
2. Starting the Colorado the first time requires you to choose
your language, time zone, and Daylight Saving mode.
When the Language page appears, highlight the preferred
language and press ENTER.
3. Highlight the preferred time zone and press ENTER.
4. Highlight the preferred Daylight Saving mode and press
ENTER. The Colorado then shows the Map page.
5. Take your Colorado to an area with a clear view of the sky.
6. If the cursor on the Map page is blinking, wait for the
Colorado to collect satellite data and establish its current
location.
7. To turn off the Colorado, press and hold the
key.
Power
Using Soft Keys
Power key
(backlight)
Battery compartment
To attach the carabiner clip:
1. Position the carabiner clip in the slots on the mounting
spine of the Colorado.
2. Slide the clip up until it locks in place.
3. To remove the carabiner clip, lift the bottom of the clip and
gently push down on the carabiner clip until it releases.
Carabiner clip
Power key
(backlight)
USB mini-B jack
(under weather cap)
Note:
You must be outdoors with a clear view of the sky to
acquire satellites.
Battery cover
Mounting
spine
External GPS
antenna connector
(under weather cap)
USB mini-B jack
(under weather cap)
Left soft key
Right soft key
Latch
Soft key label
Soft key label
Language
Carabiner Mounted
on Colorado
Time Zone
Daylight Saving
Power key
(backlight)
190-00751-01_0A.indd 2
10/19/2007 10:36:11 AM

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin