AC208446AU00ENG.pdf

(47 KB) Pobierz
Denotes connector No.
The same connector No. is used throughout the circuit diagrams to facilitate connector location search.
The first alphabetical symbol indicates the location site of the connector and a number that follows is the unique number.
Numbers are usually assigned to part in clockwise order on the diagram.
Example: A-19
Number specific to connector (serial number)
Connector location site symbol
A: Engine compartment
B: Engine and transmission
C: Instrument panel
D: Floor and roof
E: Door
F: Tailgate
A-19
Denotes earth point.
Same earth number is used throughout circuit
diagrams to facilitate search of earth point.
Refer to GROUP 70 COMPONENT LOCATIONS
- EARTH MOUNTING LOCATIONS
for details of earth points.
Front
wiring
harness
(RH)
A-18
Denotes a section covered by a
corrugated tube.
1
Denotes harness name.
A-17
The mark
shows the
standard mounting position
of wiring harness.
Denotes the colour of the tube
(If not specified, it is black).
R: Red
Y: Yellow
A-16
Y
The number of connector pins and the connector colour
(except milk white)* are shown for ease of retrieval.
Example: (2-B)
Connector colour
(milk white if no colour is indicated)
Number of connector pins
*: Typical connector colours
B: Black
BR: Brown
Y: Yellow
V: Violet
L: Blue
O: Orange
G: Green
GR: Grey
R: Red
None: Milk white
A-15
A-15 (2)
A-16 (2-GR)
A-17 (2-B)
A-18 (2-B)
A-19 (2-GR)
Fog lamp (RH)
Horn (LO)
Headlamp (RH)
Windshield washer motor
Dual pressure switch
Indicates the device to which the
connector is connected.
AC208446 AL

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin