035_116_User_manual_rear derailleur_10-speed_Campagnolo_Rev01_03_2015.pdf

(1250 KB) Pobierz
REAR
DERAILLEUR
USER MANUAL
WARNING!
Carefully read, follow and understand the instructions given in this manual. It
is an essential part of the product, and you should keep it in a safe place for
future reference.
MECHANIC QUALIFICATION -
Please be advised that many bicycle service and
repair tasks require specialized knowledge, tools and experience. General me-
chanical aptitude may not be sufficient to properly service or repair your bicycle. If
you have any doubt whatsoever regarding your service/repair ability, please take
your bicycle to a qualified repair shop.
"AN ACCIDENT" -
Please note that throughout this manual, reference is made
that "an accident" could occur. Any accident could result in damage to your
bicycle, its components and, more importantly, could cause you or a bystander to
sustain severe personal injury or even death.
INTENDED USE -
This Campagnolo
®
product is designed and manufactured for
use only on road racing style bicycles that are ridden only on smooth road or track
surfaces. Any other use of this product, such as off-road or on trails is forbidden.
LIFESPAN - WEAR - INSPECTION REQUIREMENT -
The lifespan of Cam-
pagnolo
®
components depends on many factors, such as rider size and riding
conditions. Impacts, falls, improper use or harsh use in general may compromise
the structural integrity of the components and significantly reduce their lifespan.
Some components are also subject to wear over time. Please have your bicycle
regularly inspected by a qualified mechanic for any cracks, deformation, signs
of fatigue or wear (use of penetrating fluid or other visual enhancers to loca-
te cracks on parts is recommended). If the inspection reveals any deformation,
cracks, impact marks or stress marks, no matter how slight, immediately replace
the component; components that have experienced excessive wear also need
immediate replacement. The frequency of inspection depends on many factors;
check with your authorized Campagnolo
®
representative to select a schedule that
is best for you.
If you weigh 82 kg/180 lbs or more, you must be especially vigilant and have your
bicycle inspected more frequently (than someone weighting less than 82 kg/180
lbs) for any evidence of cracks, deformation, or other signs of fatigue or stress.
Check with your mechanic to discuss whether the components you selected are
suitable for your use, and to determine the frequency of inspections.
The components of Campagnolo
®
10s transmissions, as well as the brakes,
rims, pedals and all other Campagnolo
®
products are designed as a single
integrated system. Not to affect safety, performance, longevity, functionality
and the WARRANTY, use exclusively the parts and components supplied or
specified by Campagnolo S.r.l., without interfacing or replacing them with
products, parts or components manufactured by other companies.
Note:
Tools supplied by other manufacturers for components similar to Cam-
pagnolo
®
components, may not be compatible with Campagnolo
®
components.
Likewise, tools supplied by Campagnolo s.r.l. may not be compatible with com-
ponents supplied by other manufacturers. Always check with your mechanic or
the tool manufacturer to insure compatibility before using tools supplied by one
manufacturer on components supplied by another.
The user of this Campagnolo
®
product expressly recognizes that there are risks
inherent in bicycle riding, including but not limited to the risk that a component
of the bicycle can fail, resulting in an accident, personal injury or death. By his
purchase and use of this Campagnolo
®
product, the user expressly, voluntarily
and knowingly accepts and/or assumes these risks, including but not limited to
the risk of passive or active neglicence of Campagnolo s.r.l. or hidden, latent or
obvious defects in the product, and agrees to hold Campagnolo s.r.l. harmless to
the fullest extent permitted by law against any resulting damages.
18
ENGLISH
ENGLISH
19
SAFETY RECOMMENDATIONS
• Please be advised that if the maintenance and repair procedures provided
in this manual are not properly performed, or if the other instructions in this
manual are not followed, an accident could occur.
• Never make any modifications whatsoever to any component of any
Campagnolo
®
product.
• Parts which have been bent or otherwise damaged in an accident or as
a result of any other impact must not be re-straightened. They must be
replaced immediately with original Campagnolo
®
parts.
• Wear clothes which are snug-fitting and which make you visible to traffic,
such as neon fluorescent or other bright colors.
• Avoid biking at night because it is more difficult for you to be seen by
traffic, and it is more difficult for you to see obstructions on the ground. If
you do ride at night, you should equip your bicycle with and use a headlight
and a tail light.
• Never use a bicycle or bicycle component unless you are thoroughly fami-
liar with its use and maintenance history. "Used" equipment may have been
misused and abused, and can unexpectedly fail resulting in an accident.
• When riding in wet conditions, remember that the stopping power of your
brakes is greatly reduced and that the aderence of the tires on the ground is
considerably reduced. This makes it harder to control and stop your bicycle.
Extra care is required when riding your bicycle in wet conditions to avoid
an accident.
• Always wear a properly fitted and fastened bicycle helmet that has been
approved by ANSI or SNELL.
BEFORE USING YOUR BICYCLE
DO NOT RIDE YOUR BICYCLE IF IT DOES NOT PASS THIS PRE-RIDE
TEST CORRECT ANY CONDITION BEFORE YOUR RIDE.
• Be sure that all of the components of your bicycle, including but not
limited to your brakes, pedals, handgrips, handlebars, frame and seating
system, are in optimum condition and suitable for use.
• Be sure that none of the components of bicycle are bent, damaged or
out of alignment.
• Check to be sure that all quick release fasteners, nuts and bolts are
properly adjusted. Bounce the bicycle on the ground and listen and look
for anything which may be loose.
• Be sure that your wheels are perfectly centred. Spin the wheels to
be sure that they do not wobble up and down or from side to side,
and that they do not make contact with the fork legs or brake pads
while rotating.
• Check all reflectors to make sure that they are clean, straight and secu-
rely mounted.
• Check you brake pads and cables to be sure they are in good condition.
• Test your brakes in the beginning of your ride to make sure that they
are operating properly.
• Learn and follow the local bicycle laws and regulations, and obey all
traffic signals, signs and laws while you ride.
If you ever any comments, questions or concerns, please contact your
nearest Campagnolo Service Center. A list of service centers may be
found on our website at www.campagnolo.com.
20
ENGLISH
ENGLISH
21
IMPORTANT
Always check the tables in the product technical manual to ensure compatibility
with the previous Campagnolo ranges.
1
- INFORMATION AND TECHNICAL SUPPORT
NOTE FOR SPECIALISED MECHANICS: Please remem-
ber that all assembly, disassembly, adjustment and main-
tenance procedures for the EPS drivetrain are descri-
bed in the EPS technical manual, which is available in
PDF format on our internet site www.campagnolo.com.
Scan this QR CODE to directly access the main page
I HAVE A TECHNICAL
PROBLEM
I contact my local
mechanic
Scan this QR CODE to access the search page to find your clo-
sest Campagnolo Pro Shop, or go to www.campagnolo.com.
OK
I access www.campagnolo.com
and search for a Pro Shop near me
NO
Problem solved?
2
- PREPARING THE FRAME
Was a Pro Shop
found?
NO
Is there a
Campagnolo Service Center
in my country?
OK
I contact a
Campagnolo Pro Shop
END
WARNING!
Always wear protective gloves and glasses while working on the
rear derailleur.
OK
I contact the Campagnolo
Service Center
• Check that the Campagnolo
®
plate
(Fig. 1) is fitted under the bottom
bracket shell.
CAUTION
NEVER straighten the dropout with
therear derailleur assembled because
you could damage the dropout and
cause irreparable damage or loss in
functionality to your rear derailleur.
NO
I contact the store that sold me the product
1
22
ENGLISH
ENGLISH
23
• Clear the threading of the rear
derailleur connection fitting on
the right rear dropout (B - Fig. 2)
using a tool tap with threading
10x26 TPI.
4
- CABLE ASSEMBLING AND ADJUSTING
• Carry out this adjustment with the chain
on the smallest freewheel sprocket and
with the Ergopower control button zero-
ed (Fig. 4).
2
B
B
10x26
TPI
10x26
TPI
3
- INSTALLATION
4
• Secure the rear derailleur to
the frame using screw (A - Fig.
3), and tighten with a 5 mm Allen
wrench/ torx T25 key (only
for
Centaur black and red).
Tightening torque:
10 - 12 Nm
(89 - 106 in.lbs)
• Turn the screw (B - Fig. 5) until perfect
alignment is obtained between the cen-
treline of the top roller and the axis of the
first sprocket (Fig. 6).
B
A
CLOSE
10 - 12 Nm
(89 - 106 in.lbs)
5
3
24
ENGLISH
ENGLISH
25

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin