Note: *** Watch the video of installing *** a. Before installing, please close Antivirus software and disconnect internet(use without connect to internet). b. Software must be installed at: C:\Ross-Tech c. Works on 32bit/64bit of Win7, Win8, Win10, Windows XP. d. Plug cable first, then open software. If replugged cable on computer, the software should be exited. Otherwise it will shows--Status: Not plugged into car ! E.It's not torjen of following files, because antirvius software can not recognise it, so tips wrong. You can add it to whitelist and not scan it any more. RT-USB.dll VCDS.exe VW_RNS310_VW02.rod VW_RNS310_VW03.rod VAG Newest Version: VCDS Software Version: 15.7 Firmware Version: 1.94 Original Full-chip Edition: ATMEGA162 + 16V8B + FT232RL High quality original brand new IC production??Equipped with repair chip: STC12C2052 The latest 20,822 DTCs library, the latest 20150820 version diagnostic data packet about Software open: 1.make sure cable Pluged on computer. 2.Check USB driver "Ross-Tech Direct USB Interface". 3.then open software, if still can not opened,open Task Manager,end VCDS.exe,Open software again. 4. win7 and win 10 Run as Administrator about Not plugged into car: 1.make sure cable Pluged on car. 2.Plug cable first, then open software. If replugged cable on computer, the software should be exited. Otherwise it will shows--Status: Not plugged into car !
pimpam