Smartphone Reviews_ MT6592 flashing tutorial.pdf

(3238 KB) Pobierz
Smartphone Reviews: MT6592 flashing tutorial
http://bm-smartphone-reviews.blogspot.com/2014/05/mt6592-flashing-t...
Wyświetl tę stronę w języku:
polski
Przetłumacz
Wyłącz dla języka: angielski
Opcje ▼
MT6592 flashing tutorial
Along with the release of the newest MediaTek octa-core SoC, an updated version of the known
flashing tool has also been released. It's now time to publish fresh instructions on how to flash
MT6592 based devices. Please note that the images shown on this tutorial are just examples and
that you must flash your device with the correct ROM files.
Make sure that you read everything carefully and know what you are doing. Don't blame me for
any damage that may occur on your device.
What's needed:
Computer running Windows XP (or higher)
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool (v5.1343.1 or higher)
Note:
SP Flash Tool is backward compatible with older MTK platforms, which means you can (and should) use the
most up to date version.
Let's then start with the tutorial...
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Flashing the whole ROM
First of all open
SP Flash Tool,
then click
Scatter-loading
button to load the correct scatter file
(MT6589_Android_scatter_emmc.txt, in this example because it is a MT6589 phone) for your device and ignore
any message that may appear.
1z7
2016-05-07 11:34
Smartphone Reviews: MT6592 flashing tutorial
http://bm-smartphone-reviews.blogspot.com/2014/05/mt6592-flashing-t...
With device disconnected from the computer, turn it off, remove the battery for at least 5 seconds and then put the
battery back in place (and don't turn on the device).
Press CTRL+D (or hit
Download
button) and connect your device into the computer via USB data cable. The process
will start and a red progress bar will appear.
2z7
2016-05-07 11:34
Smartphone Reviews: MT6592 flashing tutorial
http://bm-smartphone-reviews.blogspot.com/2014/05/mt6592-flashing-t...
After the red progress bar is complete, a purple progress bar will appear and bootloader will be downloaded.
Right after bootloader is downloaded (i.e. the purple progress bar is complete) the rest of the download will start
(you will see the yellow progress bar filling up).
3z7
2016-05-07 11:34
Smartphone Reviews: MT6592 flashing tutorial
http://bm-smartphone-reviews.blogspot.com/2014/05/mt6592-flashing-t...
When the yellow bar is complete, you'll get a popup with a green circle and
Download OK
message, which means
that the process has been successfully terminated.
You can now safely disconnect your device and turn it on. The process ends here.
Flashing only part(s) of the ROM
In case you want to flash just one part of the ROM, that is also possible. In the shown example, only
recovery
image
will be flashed. Deselect all parts except the one(s) you want to flash and then press CTRL+D (or
hit
Download
button).
Even if you don't have all the files, you can still flash one or more partitions (depending on which image files you
have), but obviously the scatter file is always needed.
4z7
2016-05-07 11:34
Smartphone Reviews: MT6592 flashing tutorial
http://bm-smartphone-reviews.blogspot.com/2014/05/mt6592-flashing-t...
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green
circle should appear.
5z7
2016-05-07 11:34

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin