R-30iA_KAREL_Reference_Manual_[Ver.7.50][MARRC75KR07091E_REV.C].pdf

(3275 KB) Pobierz
FANUC Robotics SYSTEM
R-30iA Controller KAREL
Reference Manual
MARRC75KR07091E Rev C
Applies to Version 7.50 and higher
© 2010
FANUC Robotics America, Inc.
About This Manual
This manual can be used with controllers labeled R-30iA or R-J3iC. If you have a controller labeled
R-J3iC, you should read R-30iA as R-J3iC throughout this manual. You should also read the “iRVision
Visual Tracking Start-up Guidance manual” for a deeper understanding of PickTool. PickTool is a
value-added application built on top of two key components —
iRVision
Visual Tracking and Line
Tracking. This manual contains some descriptions that are taken from the
iRVision
Visual Tracking
manual.
Copyrights and Trademarks
This new publication contains proprietary information of FANUC Robotics America, Inc. furnished
for customer use only. No other uses are authorized without the express written permission of
FANUC Robotics America, Inc.
FANUC Robotics America, Inc 3900 W. Hamlin Road Rochester Hills, Michigan 48309-3253
FANUC Robotics America, Inc. The descriptions and specifications contained in this manual were in
effect at the time this manual was approved. FANUC Robotics America, Inc, hereinafter referred to as
FANUC Robotics, reserves the right to discontinue models at any time or to change specifications or
design without notice and without incurring obligations.
FANUC Robotics manuals present descriptions, specifications, drawings, schematics, bills of
material, parts, connections and/or procedures for installing, disassembling, connecting, operating and
programming FANUC Robotics’ products and/or systems. Such systems consist of robots, extended
axes, robot controllers, application software, the KAREL® programming language, INSIGHT®
vision equipment, and special tools.
FANUC Robotics recommends that only persons who have been trained in one or more approved
FANUC Robotics Training Course(s) be permitted to install, operate, use, perform procedures on,
repair, and/or maintain FANUC Robotics’ products and/or systems and their respective components.
Approved training necessitates that the courses selected be relevant to the type of system installed
and application performed at the customer site.
i
About This Manual
Warning
MARRC75KR07091E Rev C
This equipment generates, uses, and can radiate radio frequency energy
and if not installed and used in accordance with the instruction manual,
may cause interference to radio communications. As temporarily
permitted by regulation, it has not been tested for compliance with the
limits for Class A computing devices pursuant to subpart J of Part 15 of
FCC Rules, which are designed to provide reasonable protection against
such interference. Operation of the equipment in a residential area is
likely to cause interference, in which case the user, at his own expense,
will be required to take whatever measure may be required to correct
the interference.
FANUC Robotics conducts courses on its systems and products on a regularly scheduled basis at its
headquarters in Rochester Hills, Michigan. For additional information contact
FANUC Robotics America, Inc Training Department 3900 W. Hamlin Road
Rochester Hills, Michigan48309-3253
www.fanucrobotics.com
For customer assistance, including Technical Support, Service, Parts & Part Repair, and
Marketing Requests, contact the Customer Resource Center, 24 hours a day, at 1-800-47-ROBOT
(1-800-477-6268). International customers should call 011-1-248-377-7159.
Send your comments and suggestions about this manual to:
product.documentation@fanucrobotics.com
The information illustrated or contained herein is not to be reproduced, copied, downloaded,
translated into another language, distributed, or published in any physical or electronic format,
including Internet, or transmitted in whole or in part in any way without the prior written consent
of FANUC Robotics America, Inc.
AccuStat®, ArcTool®,
iRVision®,
KAREL®, PaintTool®,PalletTool®, SOCKETS®, SpotTool®,
SpotWorks®, and TorchMate®are Registered Trademarks of FANUC Robotics.
FANUC Robotics reserves all proprietary rights, including but not limited to trademark and trade
name rights, in the following names:
AccuAir™, AccuCal™, AccuChop™, AccuFlow™, AccuPath™, AccuSeal™, ARC Mate™,
ARC Mate Sr.™, ARC Mate System 1™, ARC Mate System 2™, ARC Mate System 3™, ARC
Mate System 4™, ARC Mate System 5™, ARCWorks Pro™, AssistTool™, AutoNormal™,
AutoTCP™, BellTool™, BODYWorks™, Cal Mate™, Cell Finder™, Center Finder™, Clean Wall™,
DualARM™, LR Tool™, MIG Eye™, MotionParts™, MultiARM™, NoBots™, Paint Stick™,
PaintPro™, PaintTool 100™, PAINTWorks™, PAINTWorks II™, PAINTWorks III™, PalletMate™,
PalletMate PC™, PalletTool PC™, PayloadID™, RecipTool™, RemovalTool™, Robo Chop™, Robo
Spray™, S-420i™, S-430i™, ShapeGen™, SoftFloat™, SOFT PARTS™, SpotTool+™, SR Mate™,
SR ShotTool™, SureWeld™, SYSTEM R-J2 Controller™, SYSTEM R-J3 Controller™, SYSTEM
ii
MARRC75KR07091E Rev C
About This Manual
R-J3iB Controller™, SYSTEM R-J3iC Controller™, SYSTEM R-30iA Controller™,TCP Mate™,
TorchMate™, TripleARM™, TurboMove™, visLOC™, visPRO-3D™, visTRAC™, WebServer™,
WebTP™, and YagTool™.
Patents
One or more of the following U.S. patents might be related to the FANUC Robotics products
described in this manual.
FRA Patent List
4,630,567 4,639,878 4,707,647 4,708,175 4,708,580 4,942,539 4,984,745 5,238,029 5,239,739
5,272,805 5,293,107 5,293,911 5,331,264 5,367,944 5,373,221 5,421,218 5,434,489 5,644,898
5,670,202 5,696,687 5,737,218 5,823,389 5,853,027 5,887,800 5,941,679 5,959,425 5,987,726
6,059,092 6,064,168 6,070,109 6,086,294 6,122,062 6,147,323 6,204,620 6,243,621 6,253,799
6,285,920 6,313,595 6,325,302 6,345,818 6,356,807 6,360,143 6,378,190 6,385,508 6,425,177
6,477,913 6,490,369 6,518,980 6,540,104 6,541,757 6,560,513 6,569,258 6,612,449 6,703,079
6,705,361 6,726,773 6,768,078 6,845,295 6,945,483 7,149,606 7,149,606 7,211,978 7,266,422
7,399,363
FANUC LTD Patent List
4,571,694 4,626,756 4,700,118 4,706,001 4,728,872 4,732,526 4,742,207 4,835,362 4,894,596
4,899,095 4,920,248 4,931,617 4,934,504 4,956,594 4,967,125 4,969,109 4,970,370 4,970,448
4,979,127 5,004,968 5,006,035 5,008,834 5,063,281 5,066,847 5,066,902 5,093,552 5,107,716
5,111,019 5,130,515 5,136,223 5,151,608 5,170,109 5,189,351 5,267,483 5,274,360 5,292,066
5,300,868 5,304,906 5,313,563 5,319,443 5,325,467 5,327,057 5,329,469 5,333,242 5,337,148
5,371,452 5,375,480 5,418,441 5,432,316 5,440,213 5,442,155 5,444,612 5,449,875 5,451,850
5,461,478 5,463,297 5,467,003 5,471,312 5,479,078 5,485,389 5,485,552 5,486,679 5,489,758
5,493,192 5,504,766 5,511,007 5,520,062 5,528,013 5,532,924 5,548,194 5,552,687 5,558,196
5,561,742 5,570,187 5,570,190 5,572,103 5,581,167 5,582,750 5,587,635 5,600,759 5,608,299
5,608,618 5,624,588 5,630,955 5,637,969 5,639,204 5,641,415 5,650,078 5,658,121 5,668,628
5,687,295 5,691,615 5,698,121 5,708,342 5,715,375 5,719,479 5,727,132 5,742,138 5,742,144
5,748,854 5,749,058 5,760,560 5,773,950 5,783,922 5,799,135 5,812,408 5,841,257 5,845,053
5,872,894 5,887,122 5,911,892 5,912,540 5,920,678 5,937,143 5,980,082 5,983,744 5,987,591
5,988,850 6,023,044 6,032,086 6,040,554 6,059,169 6,088,628 6,097,169 6,114,824 6,124,693
6,140,788 6,141,863 6,157,155 6,160,324 6,163,124 6,177,650 6,180,898 6,181,096 6,188,194
6,208,105 6,212,444 6,219,583 6,226,181 6,236,011 6,236,896 6,250,174 6,278,902 6,279,413
6,285,921 6,298,283 6,321,139 6,324,443 6,328,523 6,330,493 6,340,875 6,356,671 6,377,869
6,382,012 6,384,371 6,396,030 6,414,711 6,424,883 6,431,018 6,434,448 6,445,979 6,459,958
6,463,358 6,484,067 6,486,629 6,507,165 6,654,666 6,665,588 6,680,461 6,696,810 6,728,417
6,763,284 6,772,493 6,845,296 6,853,881 6,888,089 6,898,486 6,917,837 6,928,337 6,965,091
6,970,802 7,038,165 7,069,808 7,084,900 7,092,791 7,133,747 7,143,100 7,149,602 7,131,848
7,161,321 7,171,041 7,174,234 7,173,213 7,177,722 7,177,439 7,181,294 7,181,313 7,280,687
7,283,661 7,291,806 7,299,713 7,315,650 7,324,873 7,328,083 7,330,777 7,333,879 7,355,725
iii

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin