Software Install Procedure: 1. Install ALL-11P2 software a. Please enter "ALL-11P2" directory. b. Execute the "SETUP.EXE". c. For WIN NT/WIN 2000 to install the software, you must be logged on as an Administrator. 2. Install GANG-08P2 software a. Please enter "GANG-08P2" directory. b. Execute the "SETUP.EXE". c. For WIN NT/WIN 2000 to install the software, you must be logged on as an Administrator. 3. Adapter software installation The ALL-11P2 software installation contains the software for all adapters in addition to the main application. NOTE: 1. The ALL-11P2's control software supports use of either the parallel port or serial port for most devices. For a small number of adapters only the serial port is supported at this time. 2. In GANG-08P2's programs, EPROM/Flash Memory of which the memory size more than 1M bits are only modified for the parallel port function. Other EPROM/Flash Memory (less than 1M bits) still need to use the serial port. 3. If the software can not enable the parallel port function, please use the serial port function instead.
Kot_Maciek