VOLT301GBD.PDF

(25 KB) Pobierz
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
PETROL
DIESEL
MAKE
VOLKSWAGEN
MOD.
LT 35
YEAR
01
→
X
ALARM/SIREN
POSITION
CENTRAL UNIT POSITION
POWER SUPPLY
Position the compact alarms and the sirens on the support of the shock absorber,
passenger’s side.
The modular systems and the modules should be positioned under the dashboard,
passenger’s side.
+ 30:
connect to the general supply wiring of the fuse box.
- 31:
connect to one of the ground derivation located behind the left lateral
bulkhead, driver’s side.
+ 15/54:
connect to the BLACK wire, at the position nr. 2 of the 18 way connector
marked A125, located in the fuse box fixed to the steering column.
Connect to the BLACK/GREEN wire, at the position nr.17 and to the
BLACK/WHITE wire, at the position nr.15 of the 18 way connector, marked A125,
located in the fuse box fixed to the steering column.
Controls with mixed polarity
Front window, drivers side:
cut the BLACKWHITE wire (positive on closing) and BLUE/WHITE wire (negative
on closing) located in the wiring harness coming out of the driver’s side door.
Front window, passengers side:
cut the BLACK wire (positive on closing) and BLUE wire (negative on closing)
located in the wiring harness coming out of the passenger’s side door.
IGNITION WIRE
DIRECTION INDICATORS
ELECTRIC WINDOWS
CENTRAL DOORS LOCKING Door’s original motor controls
Cut the BLUE/RED wire, at the position nr.11 (lock) and BLACK/RED, at the
position nr.10 (unlock), located in the wiring harness coming out of the connector of
the central doors locking unit placed under the driver’s side seat. Refer to
diagram
nr. 118
for antithefts of the Bridge serie. For antithefts of the 3100 serie refer to
diagram nr. 118A.
IMMOBILISATION POINT
Gasoil pump
Cut the BLACK wire, at the position nr.7, in the 12 way connector, located in the
fuse box fixed to the steering column.
+ 50:
Cut the wire at the position “+50” directly in the wiring harness coming out of
the connector of the ignition key.
Install an additional switch on the headlamp support plate, driver’s side.
Connect to the BROWN/WHITE wire located in the wiring harness coming out of
the driver’s side door and to the BROWN/WHITE wire located in the wiring harness
behind the rear support cover, passenger’s side. It is sugested to divide the lines
with 2 diodes.
STARTER
BONNET SWITCH
FRONT AND REAR
DOORS SWITCH
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
volt301gbd.doc
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
FITTING DIAGRAM N°118
Diagram to make the central locking on
VOLKSWAGEN LT 35 mod. 2001
(For Bridge serie antitheft)
VIOLET/ORANGE
ORANGE GREY/BLACK
VIOLET YELLOW/BLACK
+30
Towards doors motors
BLUE/RED
Original central doors
locking unit
Pos. nr.11
BLACK/RED
Pos. nr.10
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
volt301gbd.doc
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
FITTING DIAGRAM N°118A
Diagram to make the central locking on
VOLKSWAGEN LT 35 mod. 2001
(For 3100 serie antitheft)
VIOLET/WHITE
ORANGE/WHITE
ORANGE GREY/BLACK
VIOLET YELLOW/BLACK
+30
Towards doors motors
BLUE/RED
Original central doors
locking unit
Pos. nr.11
BLACK/RED
Pos. nr.10
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
volt301gbd.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin